|
|
Ti-Lock
Series Ti-lock-micro
Movement Control Joints |
Back |
|
Ti-lock-micro M25-03 |
M25-03 |
| |
|
Joint
Type
Micro control joints for use in floors
and walls. Ti-Lock-micro is simply
pressed into position compressing by
1.25mm and giving ±1mm of
movement.
Application
Ti-Lock-micro is suitable for use in
floors and walls and can be installed
in virtually the entire spectrum of
finishing media, from hard finishes
such as ceramic tiles, marble and terrazzo,
to industrial epoxy
coatings, paints and wooden flooring
or wall cladding.
Ti-Lock-micro joints are available as
two separate joint types:
 |
Ti-Lock-micro
Metal joints are very
robust and are ideal for floors
where high levels of pedestrian
traffic or vehicle loads are anticipated |
| |
|
|
Ti-Lock-micro
PVC joints are designed
for use in walls and low
traffic pedestrian floors
|
Product Description
Comprising a Brass or Stainless Steel
envelope partially encapsulating
a flexible PVC or *Vamac
core, the Ti-Lock-micro joint is designed
to
be inserted into a grout filled, 3.0mm
wide, pre-formed rebate between
finishes.
|
The
action of pressing the joint downwards
into the rebate causes it to compress
by 1.25mm leaving a visible surface
profile of only 3.0mm. From this point
(termed 'steady state'), the joint has
a primed movement capacity of ±1mm.
The very narrow surface profile of the
installed joint means that its visual
impact simulates that of a grout line
between tiled finishes.
Thermoplastic cores are available in
Stone (beige), Grey or Black as standard.
*Vamac joints have
been specifically designed for projects
where a high degree of fire resistance
and low toxic smoke emission is required.
Such installations include underground
rail terminals, basement levels of air
terminals, hospitals and other areas
where personnel (or passengers) work
(or transit) below ground level.
Vexcolt's *Vamac synthetic
rubber extrusions have been tested and
approved to the latest London Underground
Limited Engineering Standard E1042:A4
September 2000 ‘Engineering Standard
for the fire safety performance of materials
used underground’. |
|
Application |
Style |
Material |
Insert
Colour |
H |
W |
Movement
+/- (mm) |
Height
(mm) |
Width
(mm) |
Floor
/ Floor
Wall / Wall
Micro
|
M25-03B |
Brass |
Stone(beige),
Grey, Black |
25 |
3 |
1 |
M50-03B |
Brass |
Stone(beige),
Grey, Black |
50 |
3 |
1 |
M75-03B |
Brass |
Stone(beige),
Grey, Black |
75 |
3 |
1 |
M100-03B |
Brass |
Stone(beige),
Grey, Black |
100 |
3 |
1 |
Floor
/ Floor
Wall / Wall
Micro
|
M25-03S |
Stainless
Steel |
Stone(beige),
Grey, Black |
25 |
3 |
1 |
M50-03S |
Stainless
Steel |
Stone(beige),
Grey, Black |
50 |
3 |
1 |
M75-03S |
Stainless
Steel |
Stone(beige),
Grey, Black |
75 |
3 |
1 |
M100-03S |
Stainless
Steel |
Stone(beige),
Grey, Black |
100 |
3 |
1
|
|
|
|
